Home
VMware
5V0-21.21 Exam Info
5V0-21.21 Exam Questions

Curious about Actual VMware Certified Master Specialist (5V0-21.21) Exam Questions?

Here are sample VMware HCI Master Specialist (5V0-21.21) Exam questions from real exam. You can get more VMware Certified Master Specialist (5V0-21.21) Exam premium practice questions at TestInsights.

Page: 1 /
Total 66 questions

Want more questions? Get Premium Access.

Question 1

A company has engaged a consultant to upgrade an existing vSAN cluster to vSAN 7.0 U1. The company wants to ensure that the same vSAN process can be used in the future.

During the discovery phase, the consultant found the following information about the existing environment:

* The vCenter Server is currently version 7.0.

* The vSAN Cluster has the following configuration:

- vSAN version: 7.0

- Number of vSAN nodes: 6

- Encryption: enabled

- Deduplication and Compression: enabled

- Fault Domains: 1

- vSAN Capacity Utilization: 60%

* Each vSAN node has the following configuration:

- ESXi version: VMware vSphere 7.0

- CPU: 2 processors, 20 cores

- RAM: 1024GB RAM.

- Disk: 2 Cache SSDs and 6 Capacity SSDs

- Network: 4 x 10GbE

* All current hardware (which is from a single vendor) is listed on the vSAN Compatibility Guide for vSAN 7.

Which three recommendations should the consultant make to ensure that the vSAN cluster upgrade is completed? (Choose three.)

AUpgrade all vSAN nodes to VMware vSphere 7.0 U1 using the baselines capability within VMware Update Manager (VUM).

BDisable vSAN Encryption before starting the upgrade process.

CUpgrade all vSAN nodes to VMware vSphere 7.0 U1 using the images capability within VMware Update Manager (VUM).

DSet VMware Distributed Resource Scheduling (DRS) to partially automated.

EUpgrade to VMware vCenter Server 7.0 U1.

FChoose the Allow reduced redundancy option.

Correct : A, E, F

'vSAN build recommendations are provided through vSAN system baselines for vSphere Lifecycle Manager. These system baselines are managed by vSAN. They are read-only and cannot be customized.' https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.vsan.doc/GUID-E87F7946-1EDE-45EE-9087-823F7E61FABF.html

Options Selected by Other Users:

Mark Question:

Start a Discussions

Submit Your Answer:

AUpgrade all vSAN nodes to VMware vSphere 7.0 U1 using the baselines capability within VMware Update Manager (VUM).

BDisable vSAN Encryption before starting the upgrade process.

CUpgrade all vSAN nodes to VMware vSphere 7.0 U1 using the images capability within VMware Update Manager (VUM).

DSet VMware Distributed Resource Scheduling (DRS) to partially automated.

EUpgrade to VMware vCenter Server 7.0 U1.

FChoose the Allow reduced redundancy option.

0 / 1500

Question 2

An administrator of ''vsan-prod'' cluster noticed the witness components of VMs are flagged as absent after a failed attempt to replace the vSAN Witness Host.

Which action should the administrator take to resolve this issue?

AUpgrading the vSAN on-disk format

BRunning the vSAN Skyline Health check to ensure there are vSAN Object Health errors and executing the Repair Object Immediately option

CUsing the RVC command: vsan.resync_dashboard ~/computers/vsan-prod

DPlacing the vSAN Witness Host in Maintenance Mode and adding to the vSAN cluster

Correct : B

Options Selected by Other Users:

Mark Question:

Start a Discussions

Submit Your Answer:

AUpgrading the vSAN on-disk format

BRunning the vSAN Skyline Health check to ensure there are vSAN Object Health errors and executing the Repair Object Immediately option

CUsing the RVC command: vsan.resync_dashboard ~/computers/vsan-prod

DPlacing the vSAN Witness Host in Maintenance Mode and adding to the vSAN cluster

0 / 1500

Question 3

An architect is designing a vSAN cluster.

Which storage controller option will yield optimal performance?

AHugh queue depth

BSet caching to 50% read on the controller

CEnable battery write-back caching

DRAID 0

Correct : A

Storage Controller Queue Depth There are two important items displayed by the VCG for storage I/O controllers that should be noted. The first of these is ''features'' and the second is queue depth. Queue depth is extremely important, as issues have been observed with controllers that have very small queue depths. In particular, controllers with small queue depths (less than 256) can impact virtual machine I/O performance when vSAN is rebuilding components, either due to a failure or when requested to do so when entering maintenance mode. Design Decision : Choose storage I/O controllers that have as large a queue depth as possible. While 256 are the minimum, the recommendation would be to choose a controller with a much larger queue depth where possible. https://core.vmware.com/resource/vmware-vsan-design-guide#sec6843-sub14

Options Selected by Other Users:

Mark Question:

Start a Discussions

Submit Your Answer:

AHugh queue depth

BSet caching to 50% read on the controller

CEnable battery write-back caching

DRAID 0

0 / 1500

Question 4

An administrator wants to deploy Kubernetes on an end-to-end VMware stack, using VMware vSAN for storage.

Which VMware product should the administrator install as the Kubernetes platform choice?

AVMware Tanzu Kubernetes Grid

BVMware Tanzu Data services

CVMware Tanzu Build service

DVMware Tanzu Mission Control

Correct : A

https://docs.vmware.com/en/VMware-Tanzu-Kubernetes-Grid-Integrated-Edition/index.html There is a picture with integration with vSAN

Options Selected by Other Users:

Mark Question:

Start a Discussions

Submit Your Answer:

AVMware Tanzu Kubernetes Grid

BVMware Tanzu Data services

CVMware Tanzu Build service

DVMware Tanzu Mission Control

0 / 1500

Question 5

An administrator is setting up vSAN file services on a vSAN cluster but is unable to join the vSAN File Services to the domain.

Which two possible reasons could explain this failure? (Choose two.)

AA read-only domain controller was being used.

BThe administrator did not pre-create a dedicated organizational unit in Active Directory.

CThe administrator wanted to register the file services to a sub-domain.

DThe administrator was using IP addresses from an IP pool.

EThe administrator was using pre-created computer objects for the file services in the Active Directory.

Correct : A, C

https://docs.vmware.com/en/VMware-vSphere/8.0/vsan-administration/GUID-CA9CF043-9434-454E-86E7-DCA9AD9B0C09.html

Options Selected by Other Users:

Mark Question:

Start a Discussions

Submit Your Answer:

AA read-only domain controller was being used.

BThe administrator did not pre-create a dedicated organizational unit in Active Directory.

CThe administrator wanted to register the file services to a sub-domain.

DThe administrator was using IP addresses from an IP pool.

EThe administrator was using pre-created computer objects for the file services in the Active Directory.

0 / 1500

Page: 1 / 14
Total 66 questions

Unlock Full
5V0-21.21 Exam Features

In Just $49 You can Access

All Official Question Types
Interactive Web-Based Practice Test Software
No Installation or 3rd Party Software Required
Customize your practice sessions (Free Demo)
24/7 Customer Support

Get Full Access Now

Marked Questions
5V0-21.21 Exam

5V0-21.21 Exam Question 1
5V0-21.21 Exam Question 2
5V0-21.21 Exam Question 3
5V0-21.21 Exam Question 4
5V0-21.21 Exam Question 5

Download PDF File Demo

Try Web-Based Exam Practice Software Demo

Commenting

In order to participate in the comments you need to be logged-in.
You can sign-up or login