Page: 1
/
17
Total 85 questions
Curious about Actual VMware VCP (2V0-41.24) Exam Questions?
Here are sample VMware NSX 4.X Professional V2 (2V0-41.24) Exam questions from real exam. You can get more VMware VCP (2V0-41.24) Exam premium practice questions at TestInsights.
Question 1
An NSX administrator is creating a Tier-1 Gateway configured in Active-Standby High Availability Mode. In the event of node failure, the failover policy should not allow the original failed node to become the Active node upon recovery.
Which failover policy meets this requirement?
Correct : B
In Non-Preemptive failover policy, once a failover occurs and a new Active node is designated, the original failed node will not automatically become the Active node upon recovery. This setting ensures that the failover does not revert to the original node after it comes back online, maintaining the stability of the network by keeping the current Active node as is.
Start a Discussions
Submit Your Answer:
Question 2
Which CLI command is used for packet capture on the ESXi Node?
Correct : C
The pktcap-uw command is specifically used on ESXi hosts for packet capture. It provides a detailed packet capture utility that allows administrators to capture traffic at various points on the ESXi host, such as virtual switches, uplinks, and VMkernel interfaces, making it a powerful tool for network troubleshooting on ESXi nodes.
Start a Discussions
Submit Your Answer:
Question 3
Which command on ESXi is used to verify the Local Control Plane connectivity with Central Control Plane?
Correct : A
The netcpa process is responsible for Local Control Plane (LCP) connectivity with the Central Control Plane (CCP) in NSX. Using the command esxcli network ip connection list | grep netcpa, administrators can verify the connectivity status between the LCP on the ESXi host and the CCP, ensuring proper communication for NSX operations.
Start a Discussions
Submit Your Answer:
Question 4
Which two statements describe the characteristics of an Edge Cluster in NSX? (Choose two.)
Correct : B, E
An NSX Edge Cluster can contain a mix of edge node types, meaning it can have both virtual machine (VM) and bare-metal edge nodes within the same cluster.
An NSX Edge Cluster supports a maximum of 8 edge nodes, allowing for scalability while adhering to the NSX design limitations for edge clusters.
Start a Discussions
Submit Your Answer:
Question 5
An NSX administrator is using ping to check connectivity between VM1 running on ESXi1 to VM2 running on ESXi2. The ping tests fail. The administrator knows the maximum transmission unit size on the physical switch is 1600.
Which command does the administrator use to check the VMware kernel ports for tunnel end point communication?
Correct : A
The vmkping ++netstack=geneve -d -s 1572 <destination IP address> command is used to check connectivity for VMware kernel ports specifically for Geneve tunnel endpoints (TEPs). The -s 1572 option sets the packet size to test within the 1600 MTU limit, accounting for the Geneve encapsulation overhead. The -d option enables the 'Don't Fragment' bit, ensuring the packet isn't fragmented along the path, which is essential for verifying MTU consistency across the network.
Start a Discussions
Submit Your Answer:
All Official Question Types