Curious about Actual Nutanix Certified Master (NCM-MCI) Exam Questions?

Here are sample Nutanix Certified Master - Multicloud Infrastructure v6.5 (NCM-MCI) Exam questions from real exam. You can get more Nutanix Certified Master (NCM-MCI) Exam premium practice questions at TestInsights.

Page: 1 /
Total 16 questions
Question 1

Task 16

Running NCC on a cluster prior to an upgrade results in the following output

FAIL: CVM System Partition /home usage at 93% (greater than threshold, 90%)

Identify the CVM with the issue, remove the fil causing the storage bloat, and check the health again by running the individual disk usage health check only on the problematic CVM do not run NCC health check

Note: Make sure only the individual health check is executed from the affected node


Correct : A

To identify the CVM with the issue, remove the file causing the storage bloat, and check the health again, you can follow these steps:

Log in to Prism Central and click on Entities on the left menu.

Select Virtual Machines from the drop-down menu and find the NCC health check output file from the list. You can use the date and time information to locate the file. The file name should be something like ncc-output-YYYY-MM-DD-HH-MM-SS.log.

Open the file and look for the line that says FAIL: CVM System Partition /home usage at 93% (greater than threshold, 90%). Note down the IP address of the CVM that has this issue. It should be something like X.X.X.X.

Log in to the CVM using SSH or console with the username and password provided.

Run the commanddu -sh /home/*to see the disk usage of each file and directory under /home. Identify the file that is taking up most of the space. It could be a log file, a backup file, or a temporary file. Make sure it is not a system file or a configuration file that is needed by the CVM.

Run the commandrm -f /home/<filename>to remove the file causing the storage bloat. Replace <filename> with the actual name of the file.

Run the commandncc health_checks hardware_checks disk_checks disk_usage_check --cvm_list=X.X.X.Xto check the health again by running the individual disk usage health check only on the problematic CVM. Replace X.X.X.X with the IP address of the CVM that you noted down earlier.

Verify that the output shows PASS: CVM System Partition /home usage at XX% (less than threshold, 90%). This means that the issue has been resolved.

#access to CVM IP by Putty

allssh df -h #look for the path /dev/sdb3 and select the IP of the CVM

ssh CVM_IP

ls

cd software_downloads

ls

cd nos

ls -l -h

rm files_name

df -h

ncc health_checks hardware_checks disk_checks disk_usage_check


Options Selected by Other Users:
Mark Question:

Start a Discussions

Submit Your Answer:
0 / 1500
Page:    1 / 16   
Total 16 questions