Curious about Actual Microsoft Power Automate RPA Developer Associate (PL-500) Exam Questions?

Here are sample Microsoft Power Automate RPA Developer (PL-500) Exam questions from real exam. You can get more Microsoft Power Automate RPA Developer Associate (PL-500) Exam premium practice questions at TestInsights.

Page: 1 /
Total 156 questions

Want more questions? Get Premium Access.

Question 1

You are developing an RPA solution that requires browser automation. You are testing the flow. You observe that the flow does not interact with web page elements in Microsoft Edge. You need to troubleshoot the issue. What should you do?

AEnable error handling on the action to retry on failure.

BEnsure the Ul flows/Selenium extension is downloaded and enabled in Microsoft Edge.

COpen Power Automate machine runtime and select Troubleshoot

DEnsure the Power Automate for desktop browser extension is downloaded and enabled in Microsoft Edge.

Correct : D

This action is necessary because browser automation actions require a browser extension to communicate with the web browser1.The UI flows/Selenium extension is compatible with Microsoft Edge and can be downloaded from here3. You also need to enable the extension in Microsoft Edge by following these steps:

Open Microsoft Edge and select Settings and more > Extensions.

Find the UI flows/Selenium extension and turn on the toggle switch next to it.

Restart Microsoft Edge.

Options Selected by Other Users:

Mark Question:

Start a Discussions

Submit Your Answer:

AEnable error handling on the action to retry on failure.

BEnsure the Ul flows/Selenium extension is downloaded and enabled in Microsoft Edge.

COpen Power Automate machine runtime and select Troubleshoot

DEnsure the Power Automate for desktop browser extension is downloaded and enabled in Microsoft Edge.

0 / 1500

Question 2

You create a variable named NewVar as shown in the configuration screen below.

You attempt to set the value of NewVar to the following URL:

The Set variable page alerts you that there is a syntax error. You need to resolve the issue. What should you do?

AEscape the percent sign (%) with a back slash (\%).

BReplace the percent sign (%) with two percent signs (%%).

CReplace the forward slash characters (/) with two forward slash characters (//).

DEscape the forward slash characters (/) with a back slash (V).

Correct : B

Options Selected by Other Users:

Mark Question:

Start a Discussions

Submit Your Answer:

AEscape the percent sign (%) with a back slash (\%).

BReplace the percent sign (%) with two percent signs (%%).

CReplace the forward slash characters (/) with two forward slash characters (//).

DEscape the forward slash characters (/) with a back slash (V).

0 / 1500

Question 3

You create several desktop flows. Each flow will run on a single user's device.

You need to determine how Power Automate will orchestrate the flows.

Which three rules will Power Automate apply? Each correct answer presents a complete solution.

NOTE: Each correct selection is worth one point.

AAll the flows are run simultaneously.

BThe first flow runs on the target device based on the priority and the time requested.

CThe remaining flows are queued.

DThe first flow runs on the target device based on Next to run status and time requested.

EThe next flow will run when each run completes based on the priority and the time requested.

FThe first and last flows run based on the priority and the time requested.

Correct : B, C, E

Options Selected by Other Users:

Mark Question:

Start a Discussions

Submit Your Answer:

AAll the flows are run simultaneously.

BThe first flow runs on the target device based on the priority and the time requested.

CThe remaining flows are queued.

DThe first flow runs on the target device based on Next to run status and time requested.

EThe next flow will run when each run completes based on the priority and the time requested.

FThe first and last flows run based on the priority and the time requested.

0 / 1500

Question 4

You develop automation solutions for a company.

When a new record is added to a Microsoft Dataverse table, the solution must add the contents of the record to a Microsoft Word Online (Business) template The solution must convert the template to a PDF document and email the PDF document to a stakeholder.

You need to design the solution.

Which three actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

AUse the Convert Word Document to PDF and Send an email actions in a cloud flow.

BUse the Convert Word Document to PDF and Send an email actions in a desktop flow.

CUse the Populate a Microsoft Word Online (Business) template action in a desktop flow.

DUse the Populate a Microsoft Word Online (Business) template action in a cloud flow.

ECreate a cloud flow that uses the When a row is added or modified trigger in Microsoft Dataverse.

Correct : A, C, D

Options Selected by Other Users:

Mark Question:

Start a Discussions

Submit Your Answer:

AUse the Convert Word Document to PDF and Send an email actions in a cloud flow.

BUse the Convert Word Document to PDF and Send an email actions in a desktop flow.

CUse the Populate a Microsoft Word Online (Business) template action in a desktop flow.

DUse the Populate a Microsoft Word Online (Business) template action in a cloud flow.

ECreate a cloud flow that uses the When a row is added or modified trigger in Microsoft Dataverse.

0 / 1500

Question 5

You are implementing a Power Automate cloud flow that submits invoice information using a custom connector action.

You observe that the custom connector action sometimes results in an error. You want the system to send you an email to alert you when the custom connector action throws an error.

You need to make sure the send email action is triggered only when the custom connector action fails.

What should you do?

ACreate a terminate action and set the status to Cancelled

BCreate a terminate action set the status to Failed and set an error code.

CSet the Configure run after action to has timed out

DSet the Configure run ate- action to has failed

ESet the Configure run after action to is skipped

Correct : D

Options Selected by Other Users:

Mark Question:

Start a Discussions

Submit Your Answer:

ACreate a terminate action and set the status to Cancelled

BCreate a terminate action set the status to Failed and set an error code.

CSet the Configure run after action to has timed out

DSet the Configure run ate- action to has failed

ESet the Configure run after action to is skipped

0 / 1500

Page: 1 / 32
Total 156 questions

Unlock Full
PL-500 Exam Features

In Just $49 You can Access

All Official Question Types
Interactive Web-Based Practice Test Software
No Installation or 3rd Party Software Required
Customize your practice sessions (Free Demo)
24/7 Customer Support

Get Full Access Now

Marked Questions
PL-500 Exam

PL-500 Exam Question 1
PL-500 Exam Question 2
PL-500 Exam Question 3
PL-500 Exam Question 4
PL-500 Exam Question 5

Download PDF File Demo

Try Web-Based Exam Practice Software Demo

Commenting

In order to participate in the comments you need to be logged-in.
You can sign-up or login