Curious about Actual Microsoft Dynamics 365 (MB-335) Exam Questions?

Correct : A, D

A catch weight item is an item that is sold by one unit of measure but is managed in inventory by a different unit of measure1. For example, diamonds are sold by boxes but weighed by carats.A full visibility catch weight item is a catch weight item that requires the weight of each individual container to be tracked2. For example, each box of diamonds must have its own weight recorded.

To set up a catch weight item for diamonds, you must do the following steps2:

Assign the item aTracking dimension groupwithactive serial number control. This enables the item to be tracked by serial numbers, which represent the individual containers of the item. Each serial number will have its own weight associated with it.

Assign the item aSerial number groupwithper qty. defined as 1. This ensures that each container of the item has a unique serial number and that only one container can be assigned to a serial number.

Create aninter-class unit of measure conversionbetweenboxes and carats. This defines the relationship between the sales unit and the inventory unit of the item. The conversion factor can be based on a nominal weight or an average weight of the containers.

Correct : C

The flushing principle is a setting that determines how and when the raw materials are consumed from inventory and registered as work in progress (WIP) for production orders and batch orders1.The flushing principle can be configured at the product level, the bill of materials (BOM) or formula line level, or the production order or batch order line level1.

The Start flushing principle indicates that the material will be automatically consumed when the production order is started1. The amount of material that is consumed is proportional to the quantity that is started.This principle is relevant if, for example, the variance in the consumption is low, the materials are low-value materials, there are no tracking requirements, or there's a short run time on operations1.

In this scenario, the warehouse manager requires that products are removed from on-hand inventory and consumed when they are picked and staged for production. Therefore, the Start flushing principle should be configured for the batch-tracked products. This way, the products will be deducted from inventory and set to WIP as soon as the production order is started on the hand-held device.

Correct : B

To view the manufacturer's suggested retail price (MSRP) for a new bill of materials (BOM) item, you need to configure a calculation group with a profit setting percentage.A calculation group is a group of settings that determine how the cost and sales price of a BOM item are calculated1.A profit setting percentage is a percentage that is added to the cost of a BOM item to calculate the sales price2.You can specify a profit setting percentage for each calculation group on the Calculation groups page3.

When you calculate the cost and sales price of a BOM item, you must select a calculation group on the Calculations page. The calculation group determines the cost model and sales price model that are used for the BOM calculation. The cost model defines how the cost of the BOM item is calculated based on the cost categories and cost groups of the components and operations. The sales price model defines how the sales price of the BOM item is calculated based on the profit setting percentage and the cost model.

By using a calculation group with a profit setting percentage, you can view the MSRP for a new BOM item when you calculate its cost and sales price. The MSRP will be shown as the calculated sales price on the Calculate item cost page. You can also view the calculation details and see how the profit setting percentage is applied to the cost of the BOM item.

The other options are not correct, because they do not allow you to view the MSRP for a new BOM item when you calculate its cost. Setting the sales price model field on the calculation group to item sales price would use the existing sales price of the BOM item from the Item price page, instead of calculating a new sales price based on a profit setting percentage. Using the category price rules to generate a trade agreement with the sales price would create a trade agreement line for the BOM item based on its category, but it would not show the MSRP when you calculate its cost. Adding a profit setting percentage to the released BOM product or to a cost group would have no effect, because these entities do not affect how the sales price of a BOM item is calculated.

1:Calculation groups2:Profit settings3:Create or modify calculation groups: [BOM calculations] : [Cost models and sales price models] : [Calculate costs and prices for manufactured items] : [Category pricing rules]

Correct : B, E

Queue time is the time that a job waits at a work center before or after the job is processed1. You can use queue time to account for paint drying time before assembly operations can begin.You can specify queue time in minutes, hours, or days on the route operations that are attached to the production order2.

To set up the operation to encompass queue times, you should do the following:

Enter a value in thequeue time afterfield for the painting operation.This value indicates how long the painted bicycle frames must wait at the painting work center before they can be moved to the next operation2. For example, if the paint drying time is 24 hours, you can enter 24 in the queue time after field and select Hours as the unit.

Enter a value in thequeue time beforefield for the assembly operation.This value indicates how long the painted bicycle frames must wait at the assembly work center before they can be processed2. For example, if there is a delay between the arrival of the frames and the start of the assembly, you can enter a value that reflects this delay in the queue time before field and select the appropriate unit.

The other options are not correct, because they do not involve queue times. Building capabilities for each resource related to color would allow you to assign resources based on their color proficiency, but it would not account for paint drying time. Entering a value in the transit time on the painting operation would indicate how long it takes to move the painted bicycle frames from one work center to another, but it would not include the waiting time before or after the movement. Making a resource group for each size and color and assigning that group to the operation would allow you to group resources that have similar characteristics and can be used interchangeably in production, but it would not affect the queue times.

1:Queue times2:Set up operations scheduling

Correct : B