Page: 1
/
14
Total 70 questions
Curious about Actual HP Aruba (HPE7-A07) Exam Questions?
Here are sample HP Aruba Certified Campus Access Mobility Expert Written (HPE7-A07) Exam questions from real exam. You can get more HP Aruba (HPE7-A07) Exam premium practice questions at TestInsights.
Question 1
A network technician racked up two 9240 mobility gateways in a single cluster that will be terminating 1700 APs in a medium-sized branch office Next, the technician cabled the gateways with two SFP28 Direct Attach Copper (DAC) cables, distributed between a two-member core switching stack and powered them up.
What must the network administrator do next regarding the gateway configuration to ensure maximum wired bandwidth utilization?
Correct : A
To maximize wired bandwidth utilization, especially when multiple APs are terminating on mobility gateways, it's best practice to aggregate physical ports into a port channel. This provides redundancy and increased bandwidth by combining the throughput of multiple ports.
Start a Discussions
Submit Your Answer:
Question 2
After onboarding three new AOS 10 gateways using the full-setup method into the same Central group, a customer cannot log in to one of the gateways using the HPE Aruba Networking Central remote console due to an incorrect password.
Correct : C
When onboarding devices into a centralized management system, each device can have its individual admin password set during the onboarding process. If this password doesn't match what is expected at the group level in the central management platform, login issues such as the one described can occur.
Start a Discussions
Submit Your Answer:
Question 3
Exhibit.
A network administrator attempts to improve multicast traffic flow and performs some packet captures for validation What can the network administrator conclude from the results?
Correct : D
Dynamic Multicast Optimization (DMO) is a feature that enhances the delivery of multicast traffic by optimizing the data rate. The before and after optimization images show a significant increase in the data rate, which is a typical result of DMO being configured, as it allows multicast traffic to be transmitted at higher data rates by converting multicast streams into unicast streams for the clients that need them.
Start a Discussions
Submit Your Answer:
Question 4
You are deploying a new AOS 10 mobility gateway cluster. Due to customer requirements, the gateways must be configured with static IP addresses and are restricted from communicating using port 443 to any URLs except tor "central arubanetworks.com
How would you onboard these gateways successfully into HPE Aruba Networking Central?
A)
B)
C)
D)
Correct : A
Option A includes all necessary steps for a full setup of an AOS 10 mobility gateway cluster, including setting the system name, switch role, ACP FQDN address, uplink port information, IP address and default gateway, DNS IP address, controller country code, timezone and clock, and admin password. Since the gateways must have static IP addresses and can only communicate on port 443 for a specific URL, this configuration would need to allow for static IP configuration and restrict communication to the required URL.
Start a Discussions
Submit Your Answer:
Question 5
A customer has deployed an AOS 10 mobility gateway cluster consisting of three controllers at a single site The WLAN is configured to tunnel wireless device traffic to the AOS 10 mobility cluster. The clients are authorized to use WPA2-Personal. An end-user has opened a ticket with the helpdesk stating they cannot connect their client device to the network. There are other devices currently associated with the SSID with no issues.
Reviewing the output, what Is the issue?
Correct : C
The issue indicated by the output is an invalid pre-shared key (PSK). The logs show multiple failures during the WPA2 key exchange process, which points to a mismatch between the PSK configured on the client device and the PSK expected by the AOS 10 mobility gateway.
Start a Discussions
Submit Your Answer:
All Official Question Types