HPE0-S59 Practice Questions| TestInsights

Question 1

Your customer has an HPE Synergy frame equipped with a D3940 Storage Module. Each of the compute nodes has an appropriate storage controller Installed and two 12Gb SAS switches installed in the first fabric.

The customer reports that compute nodes cannot access the storage module. What should you verify first when troubleshooting this problem?

AIf the D3940 module is imported in managed state that allows volume provisioning.

BIf there Is a logical interconnect created based on the 12Gb SAS switches.

CIf the D3940 storage module is property licensed through HPE OneView interface.

DIf there is at least one ISCSI network configured that will provide access to the module.

Correct : A

Options Selected by Other Users:

Mark Question:

Start a Discussions

Submit Your Answer:

AIf the D3940 module is imported in managed state that allows volume provisioning.

BIf there Is a logical interconnect created based on the 12Gb SAS switches.

CIf the D3940 storage module is property licensed through HPE OneView interface.

DIf there is at least one ISCSI network configured that will provide access to the module.

Question 2

What is a restriction of using a RoCE network?

AIt is by default configured as an untagged network and cannot be a part of a network set.

BIt does not support Private VLAN and Multicast VLAN.

Cit is not supported with HPE Virtual Connect SE 40 GD F8 Module for HPE Synergy.

DIt does not support smart link and private network features.

Correct : A

Options Selected by Other Users:

Mark Question:

Start a Discussions

Submit Your Answer:

AIt is by default configured as an untagged network and cannot be a part of a network set.

BIt does not support Private VLAN and Multicast VLAN.

Cit is not supported with HPE Virtual Connect SE 40 GD F8 Module for HPE Synergy.

DIt does not support smart link and private network features.

Question 3

Your customer plans to deploy VMware ESXi 7. 0 U2, and they are looking for a hardware platform that will allow them to use up to 16 CPU sockets

Which HPE compute system meets the customer requirements?

AHPE ProLiant DL580 Gen10

BHPE ProLiant OL380 Gen 10 Plus

CHPE Synergy 480 Gen10 Plus

DHPE Superdome Flex system

Correct : C

Options Selected by Other Users:

Mark Question:

Start a Discussions

Submit Your Answer:

AHPE ProLiant DL580 Gen10

BHPE ProLiant OL380 Gen 10 Plus

CHPE Synergy 480 Gen10 Plus

DHPE Superdome Flex system

Question 4

Your customer plans to deploy VMware ESXi 7 0 U2 and they are looking for a hardware platform mat wilt allow them to use up to 24 TB of physical memory.

Which HPE compute system meets this customer's requirements?

AHPE ProLiant DL380 Gen 10 Plus

BHPE Synergy 480 Gen10 Plus

CHPE ProLiant DL560 Gen10

DHPE Superdome Flex 280

Correct : A

Options Selected by Other Users:

Mark Question:

Start a Discussions

Submit Your Answer:

AHPE ProLiant DL380 Gen 10 Plus

BHPE Synergy 480 Gen10 Plus

CHPE ProLiant DL560 Gen10

DHPE Superdome Flex 280

Question 5

Your customer has 6 logical enclosures spanning 18 HPE Synergy frames. The customer needs to add one more logical enclosure based on 5 HPE Synergy frames

How will this change impact the customer environment?

AThe customer can add a new logical enclosure to the existing setup because the maximum number of logical enclosures in a single management ring is not reached.

BThe customer has to expand the management ring capacity either by adding HPE Composer 2 modules or adding memory to reach 128GB per module.

CThe customer has to create a new management ring for new logical enclosure because the maximum number of frames m a single management ring is reached.

DThe customer can add a new logical enclosure to an existing setup once all required licenses are added lo HPE OneView and associated with the new frames.

Correct : A

Options Selected by Other Users:

Mark Question:

Start a Discussions

Submit Your Answer:

AThe customer can add a new logical enclosure to the existing setup because the maximum number of logical enclosures in a single management ring is not reached.

BThe customer has to expand the management ring capacity either by adding HPE Composer 2 modules or adding memory to reach 128GB per module.

CThe customer has to create a new management ring for new logical enclosure because the maximum number of frames m a single management ring is reached.

DThe customer can add a new logical enclosure to an existing setup once all required licenses are added lo HPE OneView and associated with the new frames.

Curious about Actual HPE ASE (HPE0-S59) Exam Questions?

Options Selected by Other Users:

Options Selected by Other Users:

Options Selected by Other Users:

Options Selected by Other Users:

Options Selected by Other Users: