Dell EMC D-NWG-FN-23 Practice Questions| TestInsights

Question 1

In a PIM Sparse Mode (PIM-SM) based multicast topology, what function does the Rendezvous Point provide?

AThe node is used to provide IGMP snooping across a layer 3 boundary.

BThe root node of the source tree topology is used to provide routing between the source and receiver.

CThe root node of the shared tree topology is used to provide routing between the source and receiver.

DThe node is used to provide IGMP snooping on a layer 2 shared segment.

Correct : C

Options Selected by Other Users:

Mark Question:

Start a Discussions

Submit Your Answer:

AThe node is used to provide IGMP snooping across a layer 3 boundary.

BThe root node of the source tree topology is used to provide routing between the source and receiver.

CThe root node of the shared tree topology is used to provide routing between the source and receiver.

DThe node is used to provide IGMP snooping on a layer 2 shared segment.

Question 2

A customer has disabled LLDP on the management interface of the switch. What is the proper command to re- enable it?

AOS10(config)# lldp enable OS10(config)#lldp transmit OS10(config)#lldp receive

BOS10(config)# interface mgmt 1/1/1 OS10(conf-if-ma-1/1/1)#lldp med enable OS10(conf-if-ma-1/1/1)#lldp timer 10

COS10(config)# interface mgmt 1/1/1 OS10(conf-if-ma-1/1/1)#lldp transmit OS10(conf-if-ma-1/1/1)#lldp receive

DOS10(config)# interface mgmt 1/1/1 OS10(conf-if-ma-1/1/1)#lldp tly-select OS10(conf-if-ma-1/1/1)#lldp dot1tlv

Correct : C

Options Selected by Other Users:

Mark Question:

Start a Discussions

Submit Your Answer:

AOS10(config)# lldp enable OS10(config)#lldp transmit OS10(config)#lldp receive

BOS10(config)# interface mgmt 1/1/1 OS10(conf-if-ma-1/1/1)#lldp med enable OS10(conf-if-ma-1/1/1)#lldp timer 10

COS10(config)# interface mgmt 1/1/1 OS10(conf-if-ma-1/1/1)#lldp transmit OS10(conf-if-ma-1/1/1)#lldp receive

DOS10(config)# interface mgmt 1/1/1 OS10(conf-if-ma-1/1/1)#lldp tly-select OS10(conf-if-ma-1/1/1)#lldp dot1tlv

Question 3

When implementing QoS on a 10Gb connection, 6Gb is required by the customer. What QoS level best fits the requirement while keeping resource use to a minimum?

ADifferentiated service

BGuaranteed service

CFIFO

DBest-effort service

Correct : B

Options Selected by Other Users:

Mark Question:

Start a Discussions

Submit Your Answer:

ADifferentiated service

BGuaranteed service

CFIFO

DBest-effort service

Question 4

Two OS10 switches reside within a VLT domain with statically configured primary-priorities. The current primary peer, switch OS10-A, has a priority of 100, while the secondary peer, OS10-B, has a priority of 200.

If OS10-A reboots and comes back online, what roles will the VLT peers be assigned?

AOS10-A will be primary and OS10-B will be secondary.

BOS10-A will be secondary and OS10-B will be master.

COS10-A will be standby and OS10-B will be primary.

DOS10-A will be secondary and OS10-B will be primary.

Correct : D

Options Selected by Other Users:

Mark Question:

Start a Discussions

Submit Your Answer:

AOS10-A will be primary and OS10-B will be secondary.

BOS10-A will be secondary and OS10-B will be master.

COS10-A will be standby and OS10-B will be primary.

DOS10-A will be secondary and OS10-B will be primary.

Question 5

From which range can a network administrator choose when setting the RSTP priority value?

A1-6400

B0-61440

C0-614400

D1-64

Correct : B

Options Selected by Other Users:

Mark Question:

Start a Discussions

Submit Your Answer:

A1-6400

B0-61440

C0-614400

D1-64

Curious about Actual Dell EMC Networking Foundations (D-NWG-FN-23) Exam Questions?

Options Selected by Other Users:

Options Selected by Other Users:

Options Selected by Other Users:

Options Selected by Other Users:

Options Selected by Other Users: