Page: 1
/
41
Total 204 questions
Curious about Actual Cisco CCNP (300-610) Exam Questions?
Here are sample Cisco Designing Cisco Data Center Infrastructure (300-610) Exam questions from real exam. You can get more Cisco CCNP (300-610) Exam premium practice questions at TestInsights.
Question 1
A customer must deploy a new Cisco HyperFlex stretched cluster solution to ensure virtual server availability in case the data center fails. The current network environment provides multiple geographic locations. Which action must be taken to meet these objectives?
Correct : C
Start a Discussions
Submit Your Answer:
Question 2
An engineer working for a private telecommunication company with an employee ID 4419 90 979 is installing a pair of Nexus 7000 Series Switches and must deploy the solution with these requirements
* The environment must be separated for test and production purposes
* The separation should include control, data and management plane with fault domain isolation and improved security
* The test environment needs only F2 series line cards and a maximum of 256 VLANs
Which set of actions meets these requirements?
Correct : B
Start a Discussions
Submit Your Answer:
Question 3
Refer to the exhibit Due to power limitations at the customer data center, the engineering team must decommission one of the modular switches In the new design the customer must ensure that the OSPF process is fully protected on the remaining switch and minimize OSPF flapping in case of any module failure. Which solution fulfills the requirements for the new design?
Correct : A
Start a Discussions
Submit Your Answer:
Question 4
Refer to the exhibit. A Cisco engineer is configuring a customer scenario with 2 x MDS 9000 switches 24 x UCS B200M6 blade servers. UCS 64S4 Fabric Interconnect in end-host mode and 3 x UCS 5108 server chassis with 2408 Fabric Extenders The engineer installs 6 x SQL Server 2019 on all blades and then notices that there are read and write latencies What is the best way to balance the utilization across the shared ports?
Correct : D
When restrictions on oversubscription ratios are disabled, the bandwidth allocation among the shared ports is proportionate to the configured speed. (If the configured speed is auto, then bandwidth is allocated assuming a speed of 4 Gbps.) For example, if you have three shared ports configured at 1, 2, and 4 Gbps, then the allocated bandwidth ratio is 1:2:4. In Cisco SAN-OS Release 3.0 and later (or when restrictions on oversubscription ratios are enabled), port bandwidths are allocated in equal proportions, regardless of port speed, so, the bandwidth allocation for the same three ports mentioned in the example would be 1:1:1.
Start a Discussions
Submit Your Answer:
Question 5
Refer to the exhibit A company plans to implement high availability between the iSCSI host and the Fibre Channel target. Which solution must the company implement to recover from a failure of a host NIC. MDS IP storage port or Fibre Channel target port?
Correct : C
Start a Discussions
Submit Your Answer:
All Official Question Types